TC2030-ICESPI-NL No Leg Cable for use with Atmel-ICE

The TC2030-ICESPI-NL cable is a special cable for use with Atmel-ICE AVR that has a 6-pin TC2030-NL (No Legs) Tag-Connector at one end and a 10-pin 0.05" (1.27mm) pitch female IDC ribbon connector at the other. The 10-pin IDC can be plugged directly into Atmel-ICE providing 6-pin SPI, TPI, PDI, aWire and debugWIRE connections similar to the (now obsolete) Atmel AVR JTAGICE MkII.

Note: The 10-pin male connectors on the Atmel-ICE have reversed (non-standard) pin numbering. For Atmel-ICE you should purchase the LEMTA version of our cables which have the 10-pin ribbon connector fitted backwards which corrects for the Atmel-ICE pin numbering reversal. (Atmel ICE comes suppplied with a ribbon cable fitted with two 10-pin IDC connectors and a 6-pin single-in-line SIP connector - The 10-pin connector at the Atmel ICE end is reversed but the other is not, correcting the pin-numbering at the target PCB. Our LEMTA cables similarly have a reversed connector).

Note also that Atmel-ICE outputs the PDI and aWIRE DATA on a different pin to JTAGAVR MKII

TC2030-NL SPI PDI aWire 10-pin IDC
TC2030-ICESPI-NL Connections
1 MISO PDI_DATA DATA 3 TDO
2 VTGS VTref VTG 4 VTG
3 SCK     1 TCK
4 MOSI     9 TDI
5  /RESET  PDI_CLK                   6 nSRST
6 GND GND GND 2 GND

 

10-Pin IDC LEMTA IDC SPI TPI PDI aWire debugWIRE 6-pin TC2030-NL
1 TCK 10 SCK SCK       3
2 GND 9 GND GND GND GND GND 6
3 TDO 8 MISO DATA PDI_DATA DATA      1
4 VTG 7 VTG VTG VTG VTG VTG 2
5 TMS 6            
6 nSRST 5 /RESET   /RESET   PDI_CLK   RESET 5
7 n/c 4            
8 nTRST 3            
9 TDI 2 MOSI         4
10 GND 1            

Please refer to the TC2030-IDC-NL datasheet for details of the TC2030-NL connector and footprint.

 

Price: $59.95

(Select the LEMTA option for the backwards pin numbering of Atmel-ICE)