Photo gallery for TC2030-CTX-STDC14

| Image 1 of 1 |

STDC14 cable for programming STM32 MCUs

STDC14 cable for programming STM32 MCUs


6-Pin Legged TC2030 Plug-of-NailsTM Cable for use with STM32 processors using the STDC14 connector on the STLINK-V3 or STLINK-V3MINI debuggers.

Note: This STDC14 cable was previously known as TC2030-CTX-ST14. 

This special cable has a 6-pin TC2030 Tag-Connector and a 14-pin ribbon connector that mates with the FTSH-107 style micro-header found on the STLINK-V3 and STLINK-V3MINI and provides the signals necessary for the SWD protocol on the STM32 MCU including SWO.

For Datasheet refer to the similar:

See also the TC2030-CTX-NL-STDC14 "No Legs" version of the cable with footprint that saves over 66% of the board space needed by typical FTSH-107 style micro headers!

If you need all 14-pins connected to your target board see instead the TC2070-IDC-050 cable.

For traditional ARM JTAG solutions using the 20-pin 0.1" header as found on ST-LINK/V2 or the add-on Mezanine board in STLINK-V3SET see here.


Price: $43.00