TC2030-CTX 6-Pin Cable for ARM Cortex

TC2030-CTX Cable for ARM Cortex illustrated with Keil's ULINK2 TC2030-CTX Cable for use with ARM Cortex

ACE Awards finalist 2013 for TC2030-CTX ARM Cortex debugging and programming cable

Now Available! 6-Pin Legged TC2030 Plug-of-NailsTM Cable for use with ARM Cortex processors.

This special cable has a 6-pin TC2030 Tag-Connector and a 10-pin ribbon and ribbon connector that mates with the FTSH-105 style micro-headers used for Cortex Debug Connector as found in debuggers such as Keil's ULINK-2.

Datasheet: http://www.tag-connect.com/Materials/TC2030-CTX.pdf

See also the TC2030-CTX-NL "No Legs" version of the cable with footprint that saves over 66% of the board space needed by typical FTSH-105 micro headers!

For traditional ARM solutions using the 20-pin header as found on Segger's J-LINK see our TC2050-ARM2010 adapter used with TC2050-IDC (-NL) cables.

WARNING for ATMEL-ICE users: The Atmel-ICE has it's header pin numbers reversed (standard pin 1 is Atmel ICE's pin 10). To use our cable with Atmel's reversed pin-number header you'll either need to cut off the ribbon connector locating lug and plug it in reversed, or select the LEMTA option below to order with the 10-pin connector fitted backwards. If you plug in a standard (correct) Cortex cable you're going to short power and stuff out.

Keil's ULINK2 debugger and Tag-Connect Demo PCB shown for illustrative use - not included with the cable!

Price: $42.95

(Select the LEMTA option for the backwards pin numbering of Atmel-ICE)