TC2030-CIC-FT232H-5V USB-C to 6-pin Legged 5V FT232H Chip-in-Connector™ (Noel)
$100.00
Legged TC2030 FT232H Chip-in-Connector™ – 5V
More stock is expected mid to late September. There is currently a world wide shortage of FTDI chips due to data center demand.
Stock: 2
Description
TC2030 FTDI Chip-in-Connector™ for USB-to-Serial conversion, designed to replace bulky FTDI cables. A high-quality USB-C cable is included in the bundle.
DESCRIPTION
The TC2030-CIC-FT232H is a USB-C Chip-in-Connector™ that integrates a high-speed FTDI USB-to-serial conversion chip directly into our 6-Pin TC2030 connector housing, eliminating the unshielded, low-speed, poorly suited, bulky cable that is typical of traditional FTDI cables.
Designed to plug directly onto our patented TC2030 Plug-of-Nails™ footprint, the Chip-in-Connector™ lets you connect to a target board using any standard USB-C data cable. Designed for embedded programming, debugging, firmware development, and production testing, the Chip-in-Connector™ supports communication through interfaces such as UART, JTAG, I²C, and SPI, depending on the connected hardware and interface configuration.
Compare FT232H products here.
Note: Chip-in-Connector™ and USB-C cable supplied; no additional cables required.
SPECIFICATION
VCC: 5V
VCC Max current: 250mA continuous, 500mA peak
Data outputs: 3.3V logic level
Data inputs: 3.3V logic level, 5V tolerant
UART TTL level signals: 3.3V
Max data rate:
UART – 12Mbaud
SPI, JTAG, I2C – 30 Mbps
FT1248 – 30 MBps
Notes: FT232H based, utilizing Hi-Speed 480Mbps USB 2.0
See also the TC2030-NL-CIC-FT232H-5V (No-Legs) version.
See also TC2030-CIC-FT232H-5V-DTR for the DTR version.
The TC2030-CIC-FT232H-3V3 is the 3.3 volt version of this product.
CONNECTIONS
| TC2030 Pin | FTDI Signal | Type | Description |
| 1 | VCC | Output | Power supply output |
| 2 | CTS / TMS | Input | Clear to Send Control input / Handshake signal |
| 3 | RXD / TDI | Input | Receive Asynchronous Data input |
| 4 | TXD / TCLK | Output | Transmit Asynchronous Data output |
| 5 | GND | GND | Device ground supply pin |
| 6 | RTS / TDO | Output | Request To Send Control Output / Handshake signal |
DATASHEET
