This page is being updated for FTDI devices. Please see our FTDI Family Cables page
USB solutions are below.
Solutions
PCB connector
Debug Connector
Items (Click items for details)
Price
Qty
Buy
USB Type A to 6 Pin Plug-of-Nails™ – No Legs
PCB End: 6 Pin Plug-of-Nails™ No Legs
Debug End: 4 Pin USB Type A
This cable has a USB A connector and USB 2.0 cable wired to a 'No Legs' TC2030 6-pin Plug-of-Nails™ connector. It brings the USB signals directly to your PCB.
The TC2030 connector is wired as follows:
VBUS
nc
white / D-
green / D+
GND
nc
Other Tag-Connect cables with USB:
TC2030-USB legged version of USB cable
See also TC2050-PGUSB which has a 10-pin TC2050 connector with both a USB 2.0 cable and a 6-pin 0.1" ribbon connector for JTAG.
See also TC2030-FTDI which is a USB to TC2030 cable with inbuilt FTDI 232 USB to serial convertor.
This product is intended to temporarily hold a TC2030 -NL ("No Legs") cable in place on a PCB. This solution will help when board space is at a premium and you need a hands free solution for debugging. Supplied as pack of 3.
We recommend keeping a few spare of these since the tiny boards are easy to misplace when working on the bench.
For a more robust solution consider a TC2030 legged cable.
This cable has a USB A connector and USB 2.0 cable wired to a TC2030 6-pin Plug-of-Nails™ connector. It brings the USB signals directly to your PCB.
The TC2030 connector is wired as follows:
VBUS
nc
white / D-
green / D+
GND
nc
Other Tag-Connect cables with USB:
See also TC2050-PGUSB which has a 10-pin TC2050 connector with both a USB 2.0 cable and a 6-pin 0.1" ribbon connector for JTAG.
See also TC2030-FTDI which is a USB to TC2030 cable with inbuilt FTDI 232 USB to serial convertor.
1 x TC2030-USB-NL
1 x TC2030-USB
