TC2030-USB-NL

$42.95

USB A connector  to a TC2030 6-pin Plug-of-Nails™ “With Legs” connector. It brings the USB signals directly to your PCB.

AVAILABLE

SKU: TC2030-USB-1 Categories: , , ,

Description

This cable has a USB A connector and USB 2.0 cable wired to a ‘No Legs’ TC2030 6-pin Plug-of-Nails™ connector. It brings the USB signals directly to your PCB.

The TC2030 connector is wired as follows:

  1. VBUS
  2. nc
  3. white / D-
  4. green / D+
  5. GND
  6. nc

Other Tag-Connect cables with USB:

TC2030-USB legged version of USB cable
See also TC2050-PGUSB which has a 10-pin TC2050 connector with both a USB 2.0 cable and a 6-pin 0.1″ ribbon connector for JTAG.
See also TC2030-FTDI which is a USB to TC2030 cable with inbuilt FTDI 232 USB to serial convertor.

This product is used in the following debugger/device solutions:

This product is used as part of the following solutions for particular debuggers, protocols and devices. Solutions may involve additional cables, adapters or retaining clips, as well as this product you are viewing now. Click on the solution links to see full solutions and installation instructions where applicable.

USB/FTDI for USB using USB