TC2030-NL-CIC-FT232H-5V Chip-in-Connect™ FTDI USB to Serial interface with 5V VCC for Tag-connect TC2030 no-legs footprint

TC2030-NL-CIC-FT232H-5V USB-C to 6-pin No-legs 5V FT232H Chip-in-Connector™ (Noel)

$100.00

No-legs TC2030 FTDI FT232H (5V) Chip-in-Connector™ for USB-to-Serial conversion, designed to replace bulky FTDI cables. A high-quality USB-C cable is included in the bundle.

More stock is expected mid to late September. There is currently a world wide shortage of FTDI chips due to data center demand.

Stock: 2

SKU: TC2030-NL-CIC-FT232H-5V Categories: , ,

Description

The TC2030-CIC-FT232H is a USB-C Chip-in-Connector™ that integrates a high-speed FTDI USB-to-serial conversion chip directly into our 6-Pin TC2030 connector housing, eliminating the unshielded, low-speed, poorly suited, bulky cable that is typical of traditional FTDI cables.

Designed to plug directly onto our patented TC2030 Plug-of-Nails™ footprint, the Chip-in-Connector™ lets you connect to a target board using any standard USB-C data cable. Designed for embedded programming, debugging, firmware development, and production testing, the Chip-in-Connector™ supports communication through interfaces such as UART, JTAG, I²C, and SPI, depending on the connected hardware and interface configuration.

Compare FT232H products here.

Note: Chip-in-Connector™ and USB-C cable supplied; no additional cables required.

SPECIFICATION

VCC: 5V
VCC Max current: 250mA continuous, 500mA peak
Data outputs: 3.3V logic level
Data inputs: 3.3V logic level, 5V tolerant
UART TTL level signals: 3.3V
Max data rate:

UART – 12Mbaud
SPI, JTAG, I2C – 30 Mbps
FT1248 – 30 MBps

Notes: FT232H based, utilizing Hi-Speed 480Mbps USB 2.0

See also the TC2030-NL-CIC-FT232H-5V (No-Legs) version.
See also TC2030-CIC-FT232H-5V-DTR for the DTR version.

The TC2030-CIC-FT232H-3V3 is the 3.3 volt version of this product.

CONNECTIONS

TC2030 Pin FTDI Signal Type Description
1 VCC Output Power supply output
2 CTS / TMS Input Clear to Send Control input / Handshake signal
3 RXD / TDI Input Receive Asynchronous Data input
4 TXD / TCLK Output Transmit Asynchronous Data output
5 GND GND Device ground supply pin
6 RTS / TDO Output Request To Send Control Output / Handshake signal

DATASHEET

 

Related products