TC2030-PKT-ICESPI-NL 6-Pin Cable (no legs) for Microchip PICkit 4/SNAP PDI/UPDI/aWire/debugWire/SPI/TPI
6 pin no-legs plug-of-nails™ to Microchip PICkit 4/SNAP programming/debugging cable with 8-pin SIP strip.
For AVR MCUs using SPI/TPI/PDI/UPDI/aWire/debugWire.
Ideal for production programming of AVR MCUs using the Microchip PICkit 4 or SNAP in-circuit debuggers, the 6 pin plug-of-nails™ cable terminates in a 8 pin 0.1″ male SIP strip for connection to the debugger. The target board pin connections on the plug-of-nails™ connector are the same as on our TC2030-ICESPI-NL cable. The cable supports programming via PDI, UPDI, aWire, debugWire, SPI or TDI.
The TC2030-PKT-ICESPI-NL is particularly suited to environments where the connection to the PCB is of short duration, and operators are working quickly from board to board.
A major advantage of the TC2030-PKT-ICESPI-NL is the extremely small footprint required on the PCB (hardly any bigger than a surface mount resistor) allowing the minimum possible space on your PCB to be used for the programming connection.
The TC2030-PKT-ICESPI-NL (no legs) cable is also compatible with the TC2030-PKT-ICESPI legged footprint allowing use of the TC2030-PKT-ICESPI legged cable for development work and TC2030-PKT-ICESPI-NL for fast programming in production.
The TC2030-PKT-ICESPI-NL is also suited to use for debugging and development when secured into position using a TC2030-CLIP board.
|8 Pin SIP||SPI||TPI||UPDI||PDI||aWire||debugWIRE||6-pin TC2030|