I-jet is an in-circuit debugging probe for ARM and integrates seamlessly into IAR Embedded Workbench and is fully plug-and-play compatible. It provides a fast debugging platform and the power to measure target power consumption with a high degree of accuracy.
Depending on your requirements, we offer 6-pin, 10-pin or 6-pin plus 10-pin target board connector solutions.
The 6-pin solution utilizing the TC2030-CTX-20 (legged) or TC2030-CTX-20-NL (no-legs) cables allows SWD debugging/programming using minimal PCB real estate.
For full traditional JTAG with pins 1-10 of the ULINK Pro’s MIPI-20 connector all connected to the target, use our Cortex-20/MIPI-20 to 10-pin Tag-Connect™ cables TC2050-IDC-050-ALL-20 (legged) or TC2050-IDC-NL-050-ALL-20 (no-legs).
To utilize the ULINK Pro’s streaming trace technology, our Extended Trace Mode cable, TC2030-CTX-ETM has a 6-pin Tag-Connect TC2030 connector for SWD signals as well as a 10-pin TC2050 connector which connects the trace signals on pins 11 through 20 of the MIPI-20 connector to your target board. Please Note: Be sure to follow manufacturer’s advice on signal integrity and termination during design and layout.
Connecting the Tag-Connect™ cable to the IAR I-Jet
The I-Jet debugger has an exposed MIPI-20/CORTEX-20 header so it is not necessary to open up the unit. Simply connect the Tag-Connect™ cable to the header.
6-pin SWD solution
The 6-pin solution utilizes the TC2030-CTX-20 (legged) or TC2030-CTX-20-NL (no-legs) cables providing full JTAG/SWD debugging/programming capability using minimum PCB space.
Solutions
PCB connector
Debug Connector
Items (Click items for details)
Price
Qty
Buy
Cortex 20 Pin to 6 Pin Plug-of-Nails™ - No Legs
PCB End: 6 Pin Plug-of-Nails™ No Legs
Debug End: 20 Pin IDC 0.05" Female (Mates with FTSH)
This Cortex programming cable is the same as the TC2030-CTX-NL cable except it has a 0.05" (1.27mm) pitch 20-pin connector compatible with i-Jet and ULINK pro. This won't fit the traditional 20-pin 0.1" connector such as found on the standard J-Link debuggers).
The cable itself has a ten pin ribbon cable and 6-pin TC2030-NL "No legs" Tag-Connect small footprint supporting ARM Cortex MCU's.
Note: Cable only supplied, IAR's I-JET and demo board not included!
This product is intended to temporarily hold a TC2030 -NL ("No Legs") cable in place on a PCB. This solution will help when board space is at a premium and you need a hands free solution for debugging. Supplied as pack of 3.
We recommend keeping a few spare of these since the tiny boards are easy to misplace when working on the bench.
For a more robust solution consider a TC2030 legged cable.
Debug End: 20 Pin IDC 0.05" Female (Mates with FTSH)
This Cortex programming cable is the same as the TC2030-CTX cable except it has a 0.05" (1.27mm) pitch 20-pin connector compatible with i-Jet and ULINK pro. This won't fit the traditional 20-pin 0.1" connector such as found on the standard J-Link debuggers).
The cable itself has a ten pin ribbon cable and 6-pin TC2030 Tag-Connect footprint supporting ARM Cortex MCU's.
Note: Cable only supplied, IAR's I-JET and demo board not included!
The 10-pin solution provides the traditional JTAG solution with pins 1 through 10 of the I-Jet’s MIPI-20 connector all connected through to the target board.
Solutions
PCB connector
Debug Connector
Items (Click items for details)
Price
Qty
Buy
Cortex 20 Pin to 10 Pin Plug-of-Nail™ - No Legs
PCB End: 10 Pin Plug-of-Nails™ No Legs
Debug End: 20 Pin IDC 0.05" Female (Mates with FTSH)
The TC2050-IDC-NL-050-ALL-20 programming cable has an 0.050" pitch ribbon connector suitable for ULINK2 and similar debuggers that use the Samtec FTSH-110-01 style micro-header. This uses the "No Legs" version of the TC2050 connector, ideally suited to production where short board connection times are required but also suitable for development.
The pin connections are 1-1 and pins 1-10 are connected, pins 11-20 are not connected in the cable.
Please refer to TC2050-IDC-NL datasheet for the PCB footprint information.
This product is intended to temporarily hold a TC2050-NL cable in place on a PCB. The solution will help when board space is premium and you need to perform a hands-free programming or debugging operation. For a more robust and convenient debugging connection consider using the TC2050 legged cable and footprint. Supplied as pack of 3.
We recommend keeping a few spare of these since they are easily misplaced when working on the desktop. Over time they may lose some grip.
Debug End: 20 Pin IDC 0.05" Female (Mates with FTSH)
The TC2050-IDC-050-ALL-20 programming cable has an 0.050" pitch ribbon connector suitable for ULINK2 and similar debuggers that use the Samtec FTSH-110-01 style micro-header.
The pin connections are 1-1 and pins 1-10 are connected, pins 11-20 are not connected in the cable.
Please refer to TC2050-IDC datasheet for the PCB footprint information.
6-pin plus 10-pin SWD solution with ETM full trace capability
SWD testing/programming is provided via the 6-pin connector while full trace capability is provided via the 10-pin connector which is connected to pins 11 through 20 of the MIPI-20 connector.
Please Note: Be sure to follow manufacturer’s advice on signal integrity and termination during design and layout.
Solutions
PCB connector
Debug Connector
Items (Click items for details)
Price
Qty
Buy
Cortex 20 Pin to 6 Pin + 10 Pin Plug-of-Nails™ - With Legs
PCB End: 6+10 Pin Plug-of-Nails™ Legged
Debug End: 20 Pin IDC 0.05" Female (Mates with FTSH)
TC2030-CTX-ETM is a TC2030-CTX-20 programming cable with 6-pin Tag-Connector for SWD and an additional 10-pin TC2050 connector connected to pins 11-20 providing the extended trace signals.
The pin numbering for pins 11-20 of the 0.05" pitch 20-pin Cortex maps to the TC2050 pin numbering as follows (TC2050 pins are numbered like a DIP IC).
TC2050 pin no.
Cortex 20-pin
1
11 GND/TgtPwr+cap
2
13 GND/TgtPwr+cap
3
15 GND
4
17 GND
5
19 GND
6
20 TRACEDATA[3]
7
18 TRACEDATA[2]
8
16 TRACEDATA[1]
9
14 TRACEDATA[0]
10
12 TRACECLK
TC2030 pin no.
SWD signal
1
1 VCC
2
2 SWDIO
3
10 nRESET
4
4 SWCLK
5
3,5,9 GND
6
6 SWO
Please Note: Be sure to follow manufacturer's advice on signal integrity and termination during design and layout.
I-jet is an in-circuit debugging probe for ARM and integrates seamlessly into IAR Embedded Workbench and is fully plug-and-play compatible. It provides a fast debugging platform and the power to measure target power consumption with a high degree of accuracy.
1 x TC2030-CTX-ETM