TC2030-FTDI-TTL-232RG-VIP USB to TC2030 Serial Cable

$69.00

FTDI’s TTL-232RG-VIP to USB Serial Converter cable fitted with a TC2030 6-pin “Legged” Tag-Connector.

AVAILABLE

Description

This product is FTDI’s TTL-232RG-VIP to USB Serial Converter cable fitted with a TC2030 “Legged” Tag-Connector. This tiny footprint TC2030 debug connector requires no mating-half connector on the PCB saving target board cost and space.

FTDI-TTL-232RG-VIP Specification
VCC: 1.8V to 5.25V
UART TTL level signals: VCC
Data rates: 3Mbps
Notes: VCC is a required Input, UART signal output levels match VCC and won’t be present if VCC is not connected

Nominal cable length: 5.9ft/1.8m.

See also the no-legs version TC2030-NL-FTDI-TTL-232RG-VIP. For details of the full range of Tag-Connect FTDI test cables , see the FTDI test cables range summary and full list of available FTDI family cables.

TC2030 Connections

TC2030 pin FTDI Signal Type Description
1  VCCIO (RED) Input VCC input. Power and voltage levels for the UART signals are supplied from the customers interface logic
2 CTS / TMS (BROWN) Input Clear to Send Control input / Handshake signal
3 RXD / TDI (YELLOW) Input Receive Asynchronous Data input
4 TXD / TCLK (ORANGE) Output Transmit Asynchronous Data output
5 GND (BLACK) GND Device ground supply pin
6 RTS / TDO (GREEN) Output Request To Send Control Output / Handshake signal