Description

GRIP-14 is used to hold a TC2070 -NL cable to the PCB.

The GRIP presses onto the three alignment pins from underneath the PCB and grips tightly. It is non-conductive.
This is one pack, three in a pack.

Note on GRIP-14 Usage

The GRIP-14 is intended for semi-permanent attachment of a 14-pin NL cable (such as the TC2070-IDC-NL) to a PCB for debugging or development. Due to the strong spring force of the 14-pin NL connector, the GRIP-14 often struggles to hold the cable securely and may not work well. While some customers have used it successfully for long-term attachment, results vary, and in many cases the cable will pop off from the force of the 14 spring pins.

Installing the GRIP-14 requires firm pressure to push the alignment pins into the GRIP under the board. The safest method is to position the GRIP on a flat surface and press the connector straight down. Pressing with fingers alone can slip and may cause injury. The GRIP-14 is not designed for frequent insertions or removals.

We continue to offer it due to customer demand, but please be aware it may not provide a reliable connection in all situations. Contact us if you’d like help exploring alternative solutions.

Datasheet