TC2030-NL-FTDI-C232HD-DDHSP-0-DTR USB to TC2030 No Legs Serial Cable
FTDI’s C232HD-DDHSP-0 to USB Serial Converter cable fitted with a TC2030 6-pin “No Legs” Tag-Connector using DTR instead of CTS.
This product is FTDI’s C232HD-DDHSP-0 to USB Serial Converter cable fitted with a TC2030 “No Legs” Tag-Connector with DTR connected to the TC2030 pin 2 instead of CTS. This tiny footprint TC2030 debug connector requires no mating-half connector on the PCB saving target board cost and space.
VCC Max current: 250mA
UART TTL level signals: 3.3V
Data rates: 12Mbps
Notes: FT232H based Hi-Speed 480Mbps. This cable has DTR (gray) connected to pin 2 instead of CTS (brown).
Nominal cable length: 5.9ft/1.8m.
See also the legged version TC2030-FTDI-C232HD-DDHSP-0-DTR or the same no-legs version of this cable but with CTS connected instead of DTR TC2030-NL-FTDI-C232HD-DDHSP-0. For details of the full range of Tag-Connect FTDI test cables , see the FTDI test cables range summary and full list of available FTDI family cables.
|TC2030 pin||FTDI Signal||Type||Description|
|1||VCC (RED)||Output||Power supply output|
|2||DTR (GRAY)||Output||Data Transmit Ready modem signalling line|
|3||RXD / TDI (YELLOW)||Input||Receive Asynchronous Data input|
|4||TXD / TCLK (ORANGE)||Output||Transmit Asynchronous Data output|
|5||GND (BLACK)||GND||Device ground supply pin|
|6||RTS / TDO (GREEN)||Output||Request To Send Control Output / Handshake signal|