Solutions for Renesas E8a/E1

Renesas E8a/E1

*Renesas E8a (not shown in picture), but has the same solution as the E1.

There are a couple of solutions for the Renesas E8a/E1 debugger. In conjunction with our TC-Renesas adapter, TC2030-IDC 6-pin or the TC2050-IDC 10-pin cables depending on your needs. Which you need will depend on the specific MCU you are using.

There are eight jumpers on the TC-Renesas adapter that you will need to set correctly to suit the family of MCU you are using and these will determine the signals routed to the PCB Tag-Connect footprint. Renesas chose to use a different set of pins for each device family, they no doubt had their reasons... Instructions on how to select the jumper settings are given in the TC-Renesas datasheet. Contact Us if you need help!

Plug in a TC2030-IDC or TC2050-IDC cable, depending on your MCU.

Above is the configuration for the TC2030-IDC. Below is the setup for the TC2050-IDC.

Connect it to your target PCB and start debugging!

Both cables come in "legged" and "no-leg" versions, as well as the option of our standard 6" cable or 10" versions.

For hands-free debugging, the TC20x0-IDC-NL will require the TC-2030/TC2050-CLIP depending on the cable.

 

Check out the data sheets:
TC2030-IDC
TC2030-IDC-NL
TC2050-IDC
TC2050-IDC-NL
TC-RENESAS

 

TC2030
You can purchase everything together or separately for our 2030 "LEGGED" solution here:

TC-RENESAS Adapter for RENESAS E1 or E8a Debuggers
TC2030-IDC 6-pin "Legged" 6" ribbon cable and Connecter

 

Here is the 2030 "NO-LEG" solutions that can be purchased together or separately:

TC-RENESAS Adapter for RENESAS E1 or E8a Debuggers
TC2030-IDC-NL 6-pin "No-Leg" 6" ribbon Cable and Connecter
TC2030-CLIP Retaining clip board for use with TC2030-NL family

 

 

TC2050
Purchase the parts together or separately for the 2050 "LEGGED" solution here:

TC-RENESAS Adapter for RENESAS E1 or E8a Debuggers
TC2050-IDC 10-pin "Legged" Tag-Connect Cable with Ribbon Connecter

 

Here is the 2050 "NO-LEG" solution that can be purchased together or separately:

TC-RENESAS Adapter for RENESAS E1 or E8a Debuggers
TC2050-IDC-NL 10-pin "No-Legs" Tag-Connect Cable with Ribbon Connecter
TC2050-CLIP Retaining clip board for use with TC2050-NL family