TC2030-ICESPI-NL No Leg Cable for use with Atmel-ICE
For use with Atmel-ICE AVR this has a 6-pin TC2030 No-legs Tag-Connector at one end and a 10-pin 0.05″ (1.27mm) pitch female IDC ribbon connector at the other.
The TC2030-ICESPI-NL cable is a special cable for use with Atmel-ICE AVR that has a 6-pin TC2030 No-legs Tag-Connector at one end and a 10-pin 0.05″ (1.27mm) pitch female IDC ribbon connector at the other. The 10-pin IDC can be plugged directly into Atmel-ICE providing 6-pin SPI, TPI, PDI, aWire and debugWIRE connections similar to the (now obsolete) Atmel AVR JTAGICE MkII.
Note: The 10-pin male connectors on the Atmel-ICE have reversed (non-standard) pin numbering. For Atmel-ICE you should purchase the LEMTA version of our cables which have the 10-pin ribbon connector fitted backwards which corrects for the Atmel-ICE pin numbering reversal. (Atmel ICE comes suppplied with a ribbon cable fitted with two 10-pin IDC connectors and a 6-pin single-in-line SIP connector – The 10-pin connector at the Atmel ICE end is reversed but the other is not, correcting the pin-numbering at the target PCB. Our LEMTA cables similarly have a reversed connector).
Note also that Atmel-ICE outputs the PDI and aWIRE DATA on a different pin to JTAGAVR MKII
|10-Pin IDC||LEMTA IDC||SPI||TPI||PDI||aWire||debugWIRE||6-pin TC2030|