TC2030-PKT-ICESPI 6-Pin Cable with legs for Microchip PICkit 4/SNAP PDI/UPDI/aWire/debugWire/SPI/TPI
$43.00
6 pin “legged” plug-of-nails™ to Microchip PICkit 4/SNAP programming/debugging cable with 8-pin SIP strip.
For AVR MCUs using SPI/TPI/PDI/UPDI/aWire/debugWire.
AVAILABLE
Description
Ideal for both debugging and production programming of AVR MCUs using the Microchip PICkit 4 or SNAP in-circuit debuggers, the 6 pin plug-of-nails™ cable terminates in a 8 pin 0.1″ male SIP strip for connection to the debugger. The target board pin connections on the plug-of-nails™ connector are the same as on our TC2030-ICESPI cable. The cable supports programming via PDI, UPDI, aWire, debugWire, SPI or TDI.
| 8 Pin SIP | SPI | TPI | UPDI | PDI | aWire | debugWIRE | 6-pin TC2030 |
|---|---|---|---|---|---|---|---|
| 1 | |||||||
| 2 | VTG | VTG | VTG | VTG | VTG | VTG | 2 |
| 3 | GND | GND | GND | GND | GND | GND | 6 |
| 4 | MISO | DAT | PDI_DATA | PDI_DATA | DATA | 1 | |
| 5 | SCK | CLK | 3 | ||||
| 6 | RST | PDI_CLK | RESET | 5 | |||
| 7 | MOSI | 4 | |||||
| 8 |
Tag-Connect TC2030-PKT-ICESPI programming/debugging cable is primarily intended for use in development environments but is also ideal for production programming. The spring-loaded contact pins are held firmly in place by four plastic legs each of which clips securely into its own locating hole.
Tag-Connect TC2030-PKT-ICESPI is ideal where you need to maintain a connection to the PCB for an extended period such as when performing testing or development work.
See also TC2030-PKT-ICESPI-NL for applications where an even smaller footprint is required.
This product is used in the following debugger/device solutions:
This product is used as part of the following solutions for particular debuggers, protocols and devices. Solutions may involve additional cables, adapters or retaining clips, as well as this product you are viewing now. Click on the solution links to see full solutions and installation instructions where applicable.
Microchip PICkit 4/SNAP for Atmel (Microchip) AVR using SPI/PDI/μPDI/aWire/debugWIRE
